OEM & ODM Plastic Valve and Actuator Solutions
YDKL provides OEM and ODM solutions for plastic valves, actuated valves, and valve actuator assemblies.
The product range includes plastic ball valves, butterfly valves, gate valves, check valves, 2-way and 3-way valves, electric actuators, pneumatic actuators, and ready-for-actuator valve configurations.
Customization can cover valve type, body material, sealing materials, connection, actuator configuration, control requirements, and OEM packaging. The final configuration is confirmed according to the selected valve model and operating conditions.
Buyers can send a drawing, sample, product specification, product photo, or application requirements for technical review.
What Can Be Customized
|
Customization Item |
Available Options |
|
Valve Type |
Ball, butterfly, gate, check, 2-way, 3-way |
|
Body Material |
UPVC, CPVC, PPH, PVDF |
|
Seal Material |
EPDM, FPM/FKM |
|
Valve Seat |
PTFE and other model-specific options |
|
Connection |
Threaded, spigot, barb, flanged and model-specific connections |
|
Thread Standard |
NPT, BSPT and other specified standards |
|
Piping Standard |
ANSI, DIN, JIS and applicable project requirements |
|
Actuation |
Manual, electric, pneumatic |
|
Electric Actuator |
Torque, voltage, control method, duty cycle, feedback |
|
Pneumatic Actuator |
Air pressure, single/double acting, spring return, operating cycle |
|
Packaging |
Standard packaging or agreed OEM packaging |
Important: Available options depend on the selected valve and actuator model. Final material, dimensions, pressure rating, temperature range, connection, and actuator configuration should be confirmed before production.
Valve Materials and Sealing
Material selection should be based on the actual fluid, concentration, pressure, temperature, operating cycle, and installation environment.
Current valve configurations include:
UPVC - Commonly used for water handling and selected chemical applications
CPVC - Suitable for applications requiring higher temperature capability than standard PVC configurations
PPH - Used for selected chemical and industrial fluid applications
PVDF - Used where higher chemical resistance or high-purity fluid handling is required
EPDM - Available for selected water and compatible media applications
FPM/FKM - Available for applications requiring different chemical or temperature resistance
PTFE - Used for selected valve-seat configurations
For example, an actuated plastic 3-way ball valve can be configured with different body and sealing materials according to the selected model and application.
Material compatibility should always be checked against the actual medium, concentration, temperature, and pressure rather than selected only by valve type.
Valve and Actuator Configuration
Electric Actuated Valves
Electric valve configuration may include:
- Valve type and nominal size
- Required actuator torque
- Power supply
- Opening and closing time
- Operating frequency
- On/off or modulating control
- Position feedback
- Installation environment
- Manual override requirements
The actuator is selected according to the valve torque requirement and control system.
Pneumatic Actuated Valves
Pneumatic configuration may include:
- Valve type and size
- Required torque
- Air supply pressure
- Single-acting or double-acting operation
- Spring-return requirement
- Operating cycle
- Rotation angle
- Control accessories
- Installation environment
The actuator model should be confirmed after the valve torque and operating conditions are established.
OEM Product Development
OEM projects are suitable when the buyer already has a product specification, drawing, sample, or existing valve configuration that needs to be manufactured or adapted.
Typical OEM inputs include:
CAD or technical drawing
Existing valve sample
Product photograph
Competitor or reference product
Valve dimensions
Material requirements
Connection requirements
Pressure and temperature requirements
Actuator specification
Equipment integration requirements
Packaging requirements
For sample-based projects, critical dimensions and operating requirements should be provided where available.
The technical team can review the available information and confirm which specifications need to be clarified before quotation or sampling.
ODM Product Development
ODM projects are suitable when the buyer needs a valve or actuated valve configuration developed around a specific application.
A typical ODM requirement may include:
|
Requirement |
Information to Confirm |
|
Application |
Equipment or system where the valve will be installed |
|
Fluid |
Water, chemical solution, air or other medium |
|
Valve Type |
Ball, butterfly, gate, check, 2-way or 3-way |
|
Size |
DN or inch size |
|
Body Material |
UPVC, CPVC, PPH, PVDF or specified material |
|
Seal / Seat |
Required material or application requirement |
|
Pressure |
Working pressure |
|
Temperature |
Working temperature |
|
Connection |
Threaded, spigot, barb, flange or other |
|
Standard |
ANSI, DIN, JIS, NPT, BSPT or project-specific |
|
Actuation |
Manual, electric or pneumatic |
|
Control |
On/off, modulating, feedback or other requirement |
|
Quantity |
Estimated order quantity |
|
Documentation |
Drawing, datasheet, inspection report or other documents |
Not every project requires all parameters at the initial stage. Application information can be used to identify the specifications that need confirmation.
OEM / ODM Development Process
Requirement Review
Review the buyer's drawing, sample, specification, application, or product reference.
Technical Configuration
Confirm valve type, material, connection, pressure, temperature, and actuation requirements.
Drawing or Sample Review
Check dimensions, interfaces, actuator mounting, and other critical specifications.
Sample Confirmation
Produce and evaluate the agreed sample or prototype where required.
Production
Proceed with production after the product configuration and commercial requirements are confirmed.
Final Inspection
Perform the agreed dimensional, functional, pressure, leakage, or other applicable inspections before shipment.
Production should be based on an approved specification or sample to minimize configuration differences during mass production.
Application-Based Customization
YDKL valve and actuator configurations can be evaluated for applications including:
Water treatment
HVAC systems
Smart irrigation
Swimming pool systems
RV and trailer equipment
Sprinkler and fire truck systems
Air compressor systems
Washing and cleaning equipment
Key considerations include:
Fluid compatibility
Body and sealing material
Working pressure
Operating temperature
Pipe size
Connection standard
Manual or automatic operation
Important parameters may include:
Valve size
Flow path
Operating cycle
Actuator torque
Power supply
Control signal
Installation space
Selection should consider:
Working pressure
Valve size
Fluid conditions
Actuation method
Outdoor environment
Control system
Operating frequency
Final material and configuration should be confirmed against the actual operating conditions.
OEM / ODM Project Evidence
For OEM and ODM projects, actual project evidence provides buyers with more useful information than general capability statements.
Where permitted, project pages can show:
Customer Requirement
What the buyer needed and which operating conditions had to be met.
Product Configuration
Valve type, material, size, connection, actuator, and control configuration.
Sample or Prototype
Photos of the customized sample or prototype before production.
Testing and Inspection
Applicable dimensional, pressure, leakage, functional, or actuator testing records.
Final Product
Photos of the finished customized product.
Packaging and Shipment
Photos showing OEM packaging, palletizing, labeling, container loading, or shipment preparation.
Recommended evidence for this page:
- Real OEM/ODM project photos
- Customized product samples
- Technical drawings with sensitive information removed
- Inspection records
- Test reports
- Applicable certificates
- Packaging photos
- Shipment photos
Customer names, drawings, and other commercially sensitive information should be masked unless publication has been approved.
Quality and Specification Confirmation
For OEM and ODM projects, actual project evidence provides buyers with more useful information than general capability statements.
Where permitted, project pages can show:
Before production, the following items should be confirmed where applicable:
- Valve model and configuration
- Body material
- Seal and seat material
- Nominal size
- Connection
- Working pressure
- Working temperature
- Actuator type
- Power supply
- Control method
- Feedback requirements
- Quantity
- Packaging
- Required documentation
Inspection requirements can be agreed according to the product and project.
Applicable quality documents may include:
- Product specification
- Dimensional drawing
- Material information
- Inspection report
- Test report
- Certificate
- Packing information
Only documents and certifications applicable to the actual product should be referenced.
Technical Documents
The following documents may be available depending on the product and project:
Product datasheet
Technical specification
Dimensional drawing
Installation instructions
Operating instructions
Material information
Inspection report
Test report
Applicable certificate
Packing information
For OEM/ODM projects, document requirements can be confirmed during the technical review.
What Buyers Should Provide
For a faster OEM/ODM evaluation, please provide as much of the following information as available:
- Product or valve type
- Valve size
- Fluid or medium
- Working pressure
- Working temperature
- Connection type
- Required body material
- Seal or seat requirements
- Manual, electric, or pneumatic operation
- Control requirements
- Estimated quantity
- Application or equipment information
- Drawing, sample, or product photo
If some specifications are not available, send the application, fluid, size, pressure, temperature, and available product reference first. The missing parameters can be identified during technical review.
Frequently Asked Questions
Factory And Manufacturing Evidence
OEM/ODM capability should be evaluated together with the actual manufacturing and quality-control process.
YDKL can present the following company evidence on this page or through dedicated factory and quality pages:
- Established: Since 2000
- Factory Area: 20,000 m²
- Employees: 50
- Patents: 80+
- Product Range: 90+ products
Recommended website evidence:
- Factory exterior and workshop photos
- Valve production and assembly photos
- Actuator assembly photos
- Inspection equipment
- Testing process
- Finished-product inspection
- Packaging and shipment
- Actual certificates
- Real OEM/ODM samples
Company figures should be kept consistent with the latest verified company information.
Request an OEM / ODM Quote
Send Your Drawing or Application Requirements
Have an existing valve specification, drawing, sample, product photo, or equipment requirement?
Send the available information for technical review and quotation.
The more complete the application and specification information, the easier it is to confirm the appropriate valve type, material, connection, pressure range, and actuation configuration.