Home - Solution - Details

Daily maintenance and maintenance methods of electric valves

Electric valve maintenance:
1. The electric valve should be stored in a dry and ventilated room, and both ends of the passage must be blocked.

2. Electric valves stored for a long time should be inspected regularly, dirt should be cleaned, and anti-rust oil should be applied to the processing surface.

3. After installation, regular inspections should be carried out. The main inspection items are:
① Wear of sealing surface.
②The trapezoidal thread wear of the valve stem and valve stem nut.
③ Whether the packing is out of date and ineffective. If it is damaged, it should be replaced in time.
④After the electric valve is inspected and assembled, a sealing performance test should be carried out.

 

For electric valves in operation, all valve parts should be complete and intact. The flange threads and bolts on the bracket are indispensable. The threads should be intact and no loosening is allowed. If the fastening nut on the handwheel is found to be loose, tighten it in time to avoid wearing the connection or losing the handwheel and nameplate. If the handwheel is lost, it is not allowed to use an adjustable wrench to replace it, and it should be replaced in time. The packing gland is not allowed to be skewed or have no preload gap. For electric valves in environments that are easily contaminated by rain, snow, dust, sand and other contaminants, a protective cover must be installed on the valve stem. The scale on the electric valve should be kept complete, accurate and clear. The electric valve's lead seal, cap, pneumatic accessories, etc. should be complete and intact. The insulation jacket should have no dents or cracks.

 

It is not allowed to knock, stand on or support heavy objects on the operating electric valve; especially non-metallic electric valves and cast iron electric valves, it is especially prohibited.

 

Send Inquiry

You Might Also Like