Remotely Control Motorized T Port 3 Way Valve
video
Remotely Control Motorized T Port 3 Way Valve

Remotely Control Motorized T Port 3 Way Valve

Materials
●Body: UPVC
●Seal O-ring: EPDM or FPM
End Connections
●Size: DN50-2”
●Connection: female threaded / male thread / barb / Spigots
●Pipe standard: ANSI/DIN/JIS/NPT/BSPT
●Temperature and Pressure
●Max. Temperature: 0℃—55℃
●Max. Pressure: <1.0Mpa
Motorized actuator
●90°Rotate time: 30 Secs
●Power supply: 24VDC/12VDC/220VAC/24VAC
●Control way: RS485/4G/WIFI
●Rotation angle: 90°or 180°
●Signal output: 4-20mA. 0-5V 5-10V

Description

Products Description

 

Remotely control motorized T port 3 way valve consists of a motorized actuator and a T port 3-way ball valve, which are mainly adopted in reverse osmosis water treatment system. This Remotely control motorized T port 3 way valve have 3 ports, A, B and C. Normally speaking, It can change the flow direct from A-B to A-C or B-A to B-C. In doing so ,it can divert a portion of the pressurized feed water (before entering the membrane) to the concentrate side, helping maintain the desired pressure levels on both sides of the membrane.So It allows the operator to control the ratio of brine recirculation, helping optimize system performance. Since this valve can be remotely control, It eliminates the need for operators to be physically present at the treatment site to make adjustments or monitor the system. This is especially beneficial for systems located in remote or difficult-to-access areas. This Remotely control motorized T port 3 way valve not only can change the flow direction but also can control the flow rate of the concentrate stream, operators can alter the concentration of the brine and, consequently, the permeate quality. in a reverse osmosis water treatment system provides flexibility and control over various operational parameters, including brine recirculation, pressure regulation, concentration adjustment, and energy recovery. It allows operators to optimize the system's performance, increase efficiency, and adapt to changing water quality and operational requirements. The valve's use involves directing water flow between different pathways within the system to achieve the desired outcomes based on the specific needs of the application.

 

common failures and processing menthods

 

Fault cause

● Power not connected

●  Voltage below level or incorrect

● Terminal loose or poor contact

● Over temperature protection of motor

Processing methods

● Connect power

● Check whether voltage is within the normal range

● Check and correctly connect terminal

● Check whether valve gets stuck or torque value is too big

 

product-800-1076product-800-1112product-800-1300product-800-1203product-800-1200product-800-1192product-800-1460product-800-972product-800-1516

Hot Tags: remotely control motorized t port 3 way valve, China remotely control motorized t port 3 way valve manufacturers, factory, Motorized FRPP three way valve, full bore valve, Electrical Brass 3 way Ball Valve, RS485 electric ball valve, 2 inch threaded ball valve, inch and a half ball valve

You Might Also Like

Shopping Bags